GHX serial high-speed granulator one and wall thick to smaller than millimetre of productses go on, make the apparatus of one directly hot plasticity membrane that discard, it can to soft polyvinyl chloride, high or low prices pigeonhole polyethylene, polystyrene, polypropylene, other hot plasticity discarded products or membrane of plastics carry on the granule, can also make one to the discarded products which foam the polystyrene. After the waste material is put into the machine pot in the body, are transferred whirlingly to the shearing function of cutting edge and fixed cutting edge by the high speed, make supplies cut into into chip quickly, material or slice mince, flow along pan internal cliff side under transferring knife centrifugal function of record to, make thick liquid function supplies stir from head to foot, move toward pot of body centre all around at the same time, because of putting the friction between the supplies in the high speed and producing a large amount of frictional heat with a pot of friction of walls and razor blades, make supplies temperature rise and up to half a plastification state rapidly, glue and link small one each other, before the supplies will lump, spray into all of quantitative water prepared in advance in the supplies, the cold water runs into the hot supplies, gasify rapidly, take supplies surface heat away, make the surface of supplies cool and prevent lumping sharply like this, then the broken function transferred to the cutting edge and made among the cutting edge makes it mince and become the particle (a grain of material not together irregular of size). In the course of mincing, can also follow the need and join appropriate pigment to colour.

A grain of material that this machine produces can support Extruder directly, the injecting machine is used, for requiring tighter products can push pass plastification out of the granulator first and then, make one, use.